Bir şebekeyi nasıl elle seçerim?
eSIM hattının mobil şebeke ayarlarını açın, otomatik seçimi kapatın, taramayı bekleyin, ardından plan sayfanızda listelenen ortak şebekelerden birini seçin. Bağlanmazsa bir sonrakini deneyin. Bu, havalimanları ve sınır bölgeleri gibi birden fazla şebekenin çakıştığı yerlerde en çok işe yarar.
Normally, a phone selects a network automatically, and this works well most of the time without needing to touch anything. But in certain areas where several partner networks overlap, such as airports or border areas, the phone can unknowingly attach to a network of lower quality than another available in the same spot. Manual network selection is the option that helps in this specific kind of situation.
This page is written for anyone who has just hit a connection problem or unusual slowness in an area where networks overlap, anyone who wants to know where the manual network selection menu sits, and anyone who wants to understand when to use this and when to leave the phone on automatic instead. We walk through it step by step along with common pitfalls, without naming a fixed network or a fixed menu location, since those details vary by phone brand and operating system version.
When manual network selection is worth trying
Manual network selection is worth trying when the phone will not connect at all, or connects but runs unusually slowly despite plenty of data remaining and not being in a remote area — especially somewhere already known to have several overlapping partner networks, such as around a large international airport or a border area where a neighbouring country's signal can bleed in.
If the phone is already connecting normally, there is no need to go into manual selection at all, since automatic selection works well in most general situations. This method should be used only when a genuine abnormal symptom shows up, not routinely without reason.
Where the mobile network settings menu sits
The menu for manual network selection sits within the mobile network settings for whichever eSIM line is in use. The exact menu location varies by phone brand and operating system version — some call it network selection, others may use a slightly different name. It is worth opening that specific device's own mobile network settings directly to see its actual menu name.
The key point is going into the settings for the specific eSIM line actually used for travel, not the home line that might still be your original one. A device supporting multiple active lines usually keeps each line's network settings separate, and opening the wrong line means the manual selection option needed will not appear.
Turn off automatic selection and wait for the scan
After opening the eSIM line's mobile network settings, turn off the automatic network selection switch. The phone begins scanning for networks receivable in that area and lists them. This step can take a short while — avoid turning the screen off or switching to another app while waiting, since it can interrupt the scan partway and force it to start over.
The list that appears may include both networks with a strong signal and ones with a weak signal mixed together. Some models may show an approximate signal level alongside each entry; others may show only the network name with no signal indicator, which is a normal variation between models.
Choose one of the partner networks listed on your plan page
Once the network list appears, open your plan's details page alongside it to see which partner networks are listed for that specific plan, then choose the one from the scanned list that matches that name. Choosing a network not listed on the plan page can result in no connection at all, since each plan is tied only to the specific partner networks it names.
If it does not attach, try the next one on the list
Sometimes the plan page lists more than one partner network. If the first choice does not attach after waiting a moment, go back to the list and try the next one matching the plan page's names, since signal strength from each network can vary by area even among partner networks the plan equally supports.
If every name listed on the plan page has been tried and none attaches, switch automatic selection back on first, then try restarting the phone, since a stuck scan can sometimes show a list that does not match the real signal situation at that moment.
Summary table: situations and what to do
| Situation | What to do |
|---|---|
| No connection at all in an area with overlapping networks | Try manual selection using the names listed on the plan page |
| Connects but unusually slow despite plenty of data left | Check which network it is attached to, then try the next one listed |
| Chose a network not on the plan page's list | Switch to choosing only the networks named on the plan page |
| Tried every network on the list and still nothing attaches | Switch automatic selection back on, then restart the phone |
| The phone is already connecting normally | No need for manual selection; leave it on automatic |
Full steps for manual network selection
- 1Open your plan's details page firstNote the partner networks listed for that plan, ready to match against what the phone scans up.
- 2Open the mobile network settings for the eSIM line used for travelMake sure it is the correct line, not your original home line — the menu location varies by phone brand.
- 3Turn off the automatic network selection switchWait for the phone to finish scanning for receivable networks — avoid turning the screen off or switching apps while waiting.
- 4Choose the network matching the plan page's listTap to select from the scanned list, then wait a moment for the phone to attempt connecting.
- 5If it does not attach, try the next name on the listGo back to the list and try the next matching entry, until it attaches or every listed name has been tried.
Why airports and border areas need extra care
A large international airport typically has several partner networks operating in overlap at the same spot, since it is a point where travellers from many providers converge. The phone may attach to whichever network it detects first, not necessarily the strongest one available. A border area can carry signal bleeding in from a neighbouring country's network too, causing the phone to unintentionally attach to that neighbouring country's network instead.
In both situations, manual selection helps ensure the phone attaches to a network your plan actually supports, rather than leaving it to the automatic system, which might pick one entirely unsupported by the plan — resulting in no connection at all even when the signal looks strong.
When to switch automatic selection back on
After leaving an area with overlapping networks, such as leaving the airport or the border area, it is worth switching automatic selection back on, since the network chosen manually earlier may not be the strongest one available in the new area reached. Leaving the phone on automatic selection afterward suits general travel better.
If the scan finds no networks at all
Sometimes, after turning automatic selection off and waiting for the scan, the list that appears may come back empty or unusually short. A common reason is genuinely being in an area with limited signal reach, such as inside a thick-walled building or a remote area, rather than a fault with the selection menu itself. Try moving to a more open spot and scanning again before concluding the menu itself is not working.
If moving position and scanning again still returns nothing, try restarting the phone first, since the phone's radio can sometimes get stuck in a state that does not respond to a fresh scan. If a restart still finds no network at all, switch automatic selection back on and see whether the phone connects on its own in normal mode. If it still cannot connect even on automatic, the cause is likely genuine signal reach in that area, no longer a matter of manual selection at all.
Common mistakes around manual network selection
Checklist before trying manual network selection
- Confirm the plan has not expired and still has data remaining
- Have the plan's details page open to compare partner network names
- Open the correct eSIM line's own menu, the one used for travel
- Wait for the scan to finish before choosing a network
- Try the next listed network if the first one does not attach
- Switch automatic selection back on after leaving the overlapping area
Planning ahead before reaching an area known to overlap
If you know your route will pass through an area with overlapping networks, such as connecting through a major airport or travelling near a border, opening the plan's details page for the partner network names before reaching that area saves having to search for it later while already dealing with a real connection problem. Having the information ready ahead of time is usually faster than digging for it while frustrated over signal.
Preparing this way also eases the stress of travel, since when a real connection problem shows up, you already know exactly which menu to open and which network name to choose, instead of searching for all of it from scratch while rushing through a connection or waiting for the next leg.
SSS
When should I choose a network manually instead of automatic?+
When there is no connection or unusual slowness in an area with overlapping partner networks, such as airports or borders. If the phone already connects normally, there is no need.
How do I know which network to choose?+
Open your plan's details page for the listed partner networks, and choose only from that list, since each plan only supports the networks it names.
Can I choose a network not on the list?+
Not advisable — the plan may not support that network at all, and it typically fails to attach however strong the signal looks.
Do I need to switch back to automatic after manual selection?+
Yes, ideally, once you leave the overlapping area — the network chosen earlier may not be the best option in the new area reached.
The first network I tried did not attach — what next?+
Go back to the list and try the next one matching the plan page. If every listed name has been tried, switch automatic selection back on and try restarting the phone.
Where exactly does the manual selection menu sit on my device?+
Within the mobile network settings for the eSIM line in use, though the exact position and menu name vary by phone brand and OS version — check that specific device directly.
Instagram ve TikTok'ta web paylaşım düğmesi olmadığından, telefonunuzun paylaşım menüsünü açıyoruz veya bağlantıyı kopyalıyoruz.